

Dividing and boundary fencing in Artarmon built on the surveyed line — Colorbond, timber and aluminium, with neighbour cost-sharing handled properly.
Fencing and Landscaping Experts provide boundary fencing throughout Artarmon, NSW 2064, in Willoughby City Council's area on the Lower North Shore. The ground here is reactive clay that moves seasonally, so footings are sized for clay that swells and shrinks through the seasons, which is what pushes undersized posts out of plumb. For boundary fencing in Artarmon, the standard is a 1.8m dividing fence. Per lineal metre supplied and installed, after a free on-site measure. Licensed in NSW, insured to $20 million. Phone 0492 879 796.
We work on boundary fencing throughout Artarmon 2064. The service is the dividing fence between you and your neighbour, which makes it as much a legal question as a construction one, and in this suburb one thing shapes it more than anything else. Artarmon's industrial estate needs a very different fence to its residential streets — security mesh and palisade on one side of the railway, heritage-sympathetic timber and rendered piers on the other.
A boundary fence has to sit on the actual boundary, not where the last fence happened to be. Where the line is unclear or the existing fence has crept, we say so before quoting rather than building in someone else's mistake. On tight Lower North Shore blocks a few centimetres of encroachment is a real dispute, so on narrow-frontage sites we recommend confirming the line against a survey before anything is built. Artarmon's reactive clay swells when wet and shrinks when dry, and that seasonal movement is what pushes undersized footings out of plumb over a few years.
Working in Artarmon means working with firm shale through the residential streets, with fill and made ground in the industrial pocket — and with Federation and interwar homes on modest blocks, plus a substantial light-industrial estate. No two streets here price the same, which is why we quote Artarmon jobs after a free on-site measure rather than off a rate card.
Call 0492 879 796 for a free on-site measure and a fixed written quote.
| Service | Boundary Fencing |
|---|---|
| Suburb | Artarmon, NSW 2064 |
| Local government area | Willoughby City Council |
| Region | Lower North Shore |
| Ground conditions | Reactive clay that moves seasonally |
| Recommended specification | Standard grades, with footings sized to the ground found on site |
| Standard height | 1.8m dividing fence |
| Council approval | Standard dividing fences are normally exempt development |
| Quoting basis | Per lineal metre supplied and installed, after a free on-site measure |
| Licensing | NSW contractor licence, $20 million public liability |


Panels stepped down a fall so the fence follows the ground without gaps underneath.
A low retaining wall and fence built as one structure where levels differ across the line.
Documentation set out so it can be served on an adjoining owner under the Act.
The default 1.8m dividing fence — low maintenance, private, and available in the full Colorbond range.
Treated pine or hardwood palings, lapped or capped, in a traditional Sydney style.
Powder-coated aluminium where corrosion resistance or a lighter look matters.
We work across Artarmon and the surrounding Lower North Shore suburbs, and the local conditions genuinely change the job. Lower North Shore sites are tight, steep and often heritage listed. Access is usually the hardest part of the job: narrow frontages, shared driveways, harbour slopes and sandstone shelf under a shallow layer of soil.
For boundary fencing specifically, the constraints that come up most often in Artarmon are narrow access, sandstone shelf, foreshore building lines and heritage conservation area controls. Willoughby City Council is the consent authority for Artarmon, so where approval is needed that is the path we work through with you — and we identify that before quoting rather than halfway through the job.
Under the NSW Dividing Fences Act 1991, owners on both sides of a boundary in Artarmon normally contribute equally to a sufficient dividing fence. In practice that means a standard 1.8m Colorbond or timber paling fence. If one owner wants more than that, they generally fund the difference. We set our quotes out so they work as the basis of a Fencing Notice.
1.8 metres is the accepted standard for a side and rear dividing fence in Artarmon and across Willoughby City Council's area, and it is what most exempt development provisions are written around. Front boundaries are treated differently and are usually limited to a much lower height, particularly on a corner block or in a conservation area.
You can serve a Fencing Notice under the Act, which sets out the proposed work and the cost split and gives the adjoining owner 30 days to respond. If there is still no agreement the matter can go to the NSW Civil and Administrative Tribunal. We give you a clear written Artarmon quote to attach, which resolves most disputes without going that far.
Most Artarmon boundaries have a manageable fall, which we take up by stepping the panels in short increments so the fence follows the ground without leaving gaps underneath. Where the fall is steeper we rake the panels or build a low retaining course beneath.
We will not knowingly rebuild an encroachment. If the existing Artarmon fence looks like it sits off the true boundary, we flag it and recommend confirming the line with a registered surveyor first. It is a small cost next to rebuilding a fence twice or arguing about it later.
All of Artarmon 2064, plus the surrounding streets in Chatswood, Lane Cove, Naremburn, St Leonards and Willoughby. Artarmon is characterised by Federation and interwar homes on modest blocks, plus a substantial light-industrial estate, and we schedule around what that means on the ground rather than booking a standard slot. We give you a firm start date with the quote rather than an open-ended window.
Contact Sydney's trusted fencing contractors and landscape designers
77 Garfield St
Wentworthville NSW 2145
75 644 310 547

Professional since 2016
No-obligation assessments across Sydney
Established local business
Full compliance and protection
Premium suppliers and warranties
Reliable project delivery
Best value for money
Contact us today for your free consultation and quote
Transform your Sydney property with expert fencing contractors and landscape designers