

Frameless glass, semi-frameless and aluminium pool fencing in Collaroy Plateau, built to AS 1926.1 and the NSW pool barrier rules.
Fencing and Landscaping Experts provide pool fencing throughout Collaroy Plateau, NSW 2097, in Northern Beaches Council's area on the Northern Beaches. The ground here is sandstone shelf close to the surface, so posts are frequently drilled and chemically anchored into sandstone rather than concreted into a dug hole. For pool fencing in Collaroy Plateau, barriers are built to AS 1926.1: minimum 1200mm high, maximum 100mm ground gap, maximum 100mm between verticals, a 900mm non-climbable zone, and a self-closing self-latching gate. Per lineal metre supplied and installed, after a free on-site measure. Licensed in NSW, insured to $20 million. Phone 0492 879 796.
Collaroy Plateau's exposure works both ways — less salt than the beach below, but sustained wind load that makes solid panel fencing a real engineering consideration. That is the backdrop to every pool fencing job we do in Collaroy Plateau 2097, where the service covers frameless glass, semi-frameless and powder-coated aluminium barriers, all built to the standard an inspector measures against rather than merely looking the part.
A pool barrier is a legal safety structure, so we build to AS 1926.1 and the NSW Swimming Pools Act: 1200mm minimum height, 100mm maximum ground gap, a 900mm non-climbable zone swept as an arc from the top of the barrier on the outside plus the 300mm clear zone on the inside, and gates that self-close and self-latch from any open position. Pool ownership on the Northern Beaches is high and salt exposure is brutal on hardware. Spigots, hinges and latches in 316 marine-grade stainless are the only ones that keep working here — 304 will pit and seize within a couple of years. Collaroy Plateau sits back from the open surf, so the coastal grade matters most on the exposed elevations rather than over every metre of the job. Sandstone sits close to the surface across much of Collaroy Plateau, so posts are often drilled into rock and chemically anchored rather than concreted into a dug hole.
Working in Collaroy Plateau means working with elevated sandstone plateau with shallow soil and frequent rock, exposed to strong westerlies — and with family homes on sloping blocks with elevated ocean and lagoon views. No two streets here price the same, which is why we quote Collaroy Plateau jobs after a free on-site measure rather than off a rate card.
Call 0492 879 796 for a free on-site measure and a fixed written quote.
| Service | Pool Fencing |
|---|---|
| Suburb | Collaroy Plateau, NSW 2097 |
| Local government area | Northern Beaches Council |
| Region | Northern Beaches |
| Ground conditions | Sandstone shelf close to the surface |
| Recommended specification | Glass or powder-coated aluminium to AS 1926.1, with 316 marine-grade stainless hardware |
| Standard | AS 1926.1 and the NSW Swimming Pools Act |
| Council approval | Barrier is not usually a consent matter, but it must pass certification; the pool itself must be on the NSW Swimming Pool Register |
| Quoting basis | Per lineal metre supplied and installed, after a free on-site measure |
| Licensing | NSW contractor licence, $20 million public liability |


Compliant self-closing, self-latching gates with magnetic latches and adjustable hinges.
Fixing non-compliant gaps, latches, gate swings and non-climbable zone breaches on an existing barrier.
Pre-inspection assessment and rectification of anything that would fail, ahead of your Collaroy Plateau inspection.
12mm toughened glass on stainless spigots — the clearest, most premium pool barrier available.
Glass panels between slim posts, giving most of the view at a lower cost than frameless.
Powder-coated flat-top or loop-top aluminium, the most cost-effective compliant barrier.
We work across Collaroy Plateau and the surrounding Northern Beaches suburbs, and the local conditions genuinely change the job. On the Northern Beaches, salt is the enemy. Airborne chloride from the ocean strips standard galvanising and eats fixings, so material grade matters more here than anywhere else in Sydney — and with pools on a large share of blocks, compliant pool fencing is constant work.
For pool fencing specifically, the constraints that come up most often in Collaroy Plateau are coastal salt exposure, sand and dune soils near the beach, and strict pool barrier compliance. Northern Beaches Council is the consent authority for Collaroy Plateau, so where approval is needed that is the path we work through with you — and we identify that before quoting rather than halfway through the job.
The same NSW rules apply in Collaroy Plateau as statewide: a minimum 1200mm barrier height, a maximum 100mm gap at ground level, maximum 100mm between vertical members, a 900mm non-climbable zone measured as an arc from the top of the barrier on the outside (with a 300mm clear zone inside), and a gate that self-closes and self-latches from any open position. The pool must also be registered on the NSW Swimming Pool Register, and Northern Beaches Council enforces compliance locally.
The fence does not carry its own certificate, but the pool barrier as a whole must pass inspection to obtain a Certificate of Compliance, which you need to sell or lease the property. We build to the standard and stay on site through the inspection process for Collaroy Plateau clients so anything raised gets resolved immediately.
Aluminium is the most economical compliant option, semi-frameless glass sits in the middle, and frameless glass is the premium. Panel count, gate count, and how the barrier interacts with your levels all move the price. Access is a genuine cost factor in Collaroy Plateau — where materials have to be carried down a stepped side path or worked off a slope rather than delivered straight to the work, the labour component rises. We quote per Collaroy Plateau site after measuring.
316 marine-grade stainless, without exception. In Collaroy Plateau the cheaper 304 grade will pit and the latch will eventually seize, which is both an annoyance and a compliance failure. Spigots, hinges, latches and fixings all need to be specified in 316 here.
In Collaroy Plateau the three recurring failures are a gate that does not latch reliably from every position, a climbable object inside the 900mm non-climbable zone — planters, pot plants, a retaining wall, a BBQ — and a ground gap that has opened up as soil settled or mulch washed away. All three are fixable, usually in a single visit.
All of Collaroy Plateau 2097, plus the surrounding streets in Collaroy, Wheeler Heights, Cromer and Narraweena. Collaroy Plateau is characterised by family homes on sloping blocks with elevated ocean and lagoon views, and we schedule around what that means on the ground rather than booking a standard slot. We give you a firm start date with the quote rather than an open-ended window.
Contact Sydney's trusted fencing contractors and landscape designers
77 Garfield St
Wentworthville NSW 2145
75 644 310 547

Professional since 2016
No-obligation assessments across Sydney
Established local business
Full compliance and protection
Premium suppliers and warranties
Reliable project delivery
Best value for money
Contact us today for your free consultation and quote
Transform your Sydney property with expert fencing contractors and landscape designers