A dark powder-coated aluminium horizontal-slat pedestrian gate hung in a narrow side passage - Timber Gates in Cremorne 2090

Timber Gates Cremorne

Custom timber gates in Cremorne — pedestrian, side access and double driveway gates built on braced frames that stay square.

Call Now Free Quote

Licensed & Insured$20M Public LiabilityServicing CremorneFixed Written Quotes

Timber Gates in Cremorne: the short answer

Fencing and Landscaping Experts provide timber gates throughout Cremorne, NSW 2090, in North Sydney Council's area on the Lower North Shore. The ground here is sandstone shelf close to the surface, so posts are frequently drilled and chemically anchored into sandstone rather than concreted into a dug hole. For timber gates in Cremorne, common sizes are 900mm pedestrian and 1.2-1.5m side access. Per lineal metre supplied and installed, after a free on-site measure. Licensed in NSW, insured to $20 million. Phone 0492 879 796.

Licensed & Insured

NSW contractor licence

Quality Materials

Specified for the site

Clear Timelines

Fixed written quotes

Building Since 2016

Across Sydney

Timber Gates in Cremorne 2090

Cremorne's harbour-view blocks make fence height a live issue between neighbours, so agreeing the height and style in writing before work starts saves a lot of grief. That is the backdrop to every timber gates job we do in Cremorne 2090, where the service covers pedestrian, side access and double driveway gates in treated pine and hardwood, built to order rather than bought off a rack.

A timber gate fails by dropping at the latch corner. We build on a properly braced frame with the diagonal running from the bottom hinge to the top latch, hang it on adjustable heavy-duty hinges, and post it on footings sized for the leaf weight — not the fence beside it. Lower North Shore gates are frequently on a slope or a step, which changes the swing and the ground clearance — a gate that clears at the hinge and fouls at the latch is the classic result of ignoring that. Sandstone sits close to the surface across much of Cremorne, so posts are often drilled into rock and chemically anchored rather than concreted into a dug hole.

The ground under Cremorne is sandstone slopes with shallow soil, falling to the harbour on both sides of the peninsula, and the suburb is built out with a dense mix of apartments, semis and harbour-view homes. Those two facts decide footing depth, material choice and how long the job takes, so we measure on site before we price anything in North Sydney Council's area.

Call 0492 879 796 for a free on-site measure and a fixed written quote.

What We Offer in Cremorne

Treated pine and hardwood
Matching existing fence styles
Pedestrian, side and double driveway gates
Lockable and child-safe latching
Automation-ready posts on request
Custom built to your opening
Braced frames that stay square
Heavy-duty adjustable hinges

Timber Gates Cremorne — Key Facts

Service	Timber Gates
Suburb	Cremorne, NSW 2090
Local government area	North Sydney Council
Region	Lower North Shore
Ground conditions	Sandstone shelf close to the surface
Recommended specification	H4 treated pine or hardwood posts, rated for in-ground use
Common sizes	900mm pedestrian, 1.2-1.5m side access
Council approval	Normally exempt as part of a dividing fence; front and driveway gates can differ
Quoting basis	Per lineal metre supplied and installed, after a free on-site measure
Licensing	NSW contractor licence, $20 million public liability

Our Fencing & Landscaping Work

A white scalloped picket fence in front of a planted cottage-style garden bed - Fencing and Landscaping Experts, timber gates contractors in Cremorne 2090 — A white scalloped picket fence in front of a planted cottage-style garden bed. From our fencing and landscaping portfolio. We also provide timber gates throughout Cremorne 2090 and the surrounding suburbs.

A new capped treated pine paling fence being installed along a rear boundary - Fencing and Landscaping Experts, timber gates contractors in Cremorne 2090 — A new capped treated pine paling fence being installed along a rear boundary. Another job from our portfolio. Timber Gates in Cremorne 2090 is quoted in writing after a free on-site measure, never over the phone.

Timber Gates Options in Cremorne

Automation-Ready Gates

Timber gates built to the weight and post specification an automation system needs.

Pedestrian Gates

Standard 900mm front and side access gates matched to the adjoining fence.

Wide Side Access Gates

1.2m to 1.5m gates sized for mowers, bins, trailers and building materials.

Double Driveway Gates

Twin-leaf timber gates with drop bolts, sized and braced for the span.

Feature Entry Gates

Hardwood entry gates as an architectural feature for the front of the property.

Gate Rehang and Repair

Re-squaring, re-hinging and re-posting existing Cremorne timber gates that have dropped.

Local Knowledge: Cremorne 2090

We work across Cremorne and the surrounding Lower North Shore suburbs, and the local conditions genuinely change the job. Lower North Shore sites are tight, steep and often heritage listed. Access is usually the hardest part of the job: narrow frontages, shared driveways, harbour slopes and sandstone shelf under a shallow layer of soil.

For timber gates specifically, the constraints that come up most often in Cremorne are narrow access, sandstone shelf, foreshore building lines and heritage conservation area controls. North Sydney Council is the consent authority for Cremorne, so where approval is needed that is the path we work through with you — and we identify that before quoting rather than halfway through the job.

Timber Gates Service Area Around Cremorne

Neutral BayMosmanCammerayKurraba PointChatswoodArtarmonLane CoveGreenwichSt LeonardsCrows NestLower North Shore

Timber Gates Cremorne FAQs

How much does a custom timber gate cost in Cremorne?

A timber gate in Cremorne is priced on the opening width, the height, the timber species and the hardware. A standard pedestrian gate is a modest addition to a fencing job; a wide double driveway gate needs heavier framing, bigger posts and deeper footings, and is priced accordingly. We quote the gate as a separate line so you can see exactly what it adds.

Why do timber gates sag?

Almost always because the frame was not braced correctly or the post was undersized for the leaf weight. A gate is a lever — every kilogram at the latch end pulls on the hinge post all day. We brace from the bottom hinge corner up to the top latch corner, and set gate posts in deeper footings than the fence posts either side of them.

Can you match a new gate to my existing fence in Cremorne?

Yes. We match paling profile, spacing, capping and finish so a new gate reads as part of the original fence rather than a patch. Where the existing Cremorne fence has weathered significantly we can supply the gate unfinished so it can be left to grey off to the same tone.

Can a timber gate be automated?

Yes, with the right build. Timber leaves are heavy, so automation needs a stronger frame, larger posts, deeper footings and a conduit run for power and safety devices. Planning that in at build time costs far less than rebuilding the posts later — worth deciding before we start your Cremorne gate.

What hardware do you use on Cremorne gates?

Heavy-duty adjustable hinges and a quality latch on every Cremorne gate. Adjustability matters more than people expect — timber moves seasonally, and being able to bring a gate back into line without rehanging it is what keeps it closing years later.

Which parts of Cremorne do you cover for timber gates?

All of Cremorne 2090, plus the surrounding streets in Neutral Bay, Mosman, Cammeray and Kurraba Point. Cremorne is characterised by a dense mix of apartments, semis and harbour-view homes, and we schedule around what that means on the ground rather than booking a standard slot. We give you a firm start date with the quote rather than an open-ended window.