

Frameless glass pool barriers for the new Box Hill estates, set out with your pool builder so the fence is certified before the water goes in.
Box Hill has gone from farmland to one of the fastest growing suburbs in The Hills Shire Council area in under a decade. Nearly every home here is new, and a very high share of those homes go straight from handover to a pool contract. That means we are usually on site while the yard is still bare dirt, working alongside the pool builder, the landscaper and the paving crew rather than retrofitting around an established garden.
Getting the sequence right matters in Box Hill. The barrier has to satisfy AS 1926.1 and the Swimming Pools Act 1992 before the pool can be filled and used, and the pool must be on the NSW Swimming Pool Register. We set out panel lines early so that spigot positions suit the finished paving levels, gates open away from the water, and no retaining wall step or garden bed ends up sitting inside the 900mm non-climbable zone.
Box Hill lots are typically narrow and deep with open, wind-exposed rear yards, so panel thickness and spigot spacing are chosen for the exposure rather than a one-size rule. Every barrier comes with a fixed written quote after a free measure. Call the Box Hill team on 0492 879 796 to lock in a site visit.
The most requested option in Box Hill, using 12mm toughened panels on polished or black spigots to keep new courtyards feeling open.
Slim vertical posts with glass infill, a durable choice for the exposed rear yards on the newer Box Hill releases.
Powder-coated aluminium in monument and matt black to match the darker window and roof palettes used across Box Hill estates.
Soft-close hydraulic hinges and magnetic latches specified so the gate self-closes and self-latches from any open position.
Setout done with your Box Hill pool builder and paver so spigots land in structural concrete at the correct finished level.
The barrier is handed over ready for a private certifier or The Hills Shire inspection, with the non-climbable zone already clear.
The barrier must be complete and compliant before the pool is filled and used, so the practical answer in Box Hill is straight after the pool shell, coping and surrounding paving are finished. We come in during the pool build to mark the setout, then return once levels are locked so spigots sit in structural concrete at the right height.
There is no per-metre rate we can quote sight unseen. Cost is driven by barrier length, glass versus aluminium, gate count, spigot type and whether the surround is concrete, paving or decking. We measure the Box Hill site free of charge and issue a fixed written quote covering supply, install and disposal.
Yes. Frameless glass in Box Hill uses 12mm toughened panels with spigots chemically anchored into cured concrete, and we tighten spigot spacing on exposed rear yards where the wind runs unobstructed across the open land to the north. Panel sizes are selected for the specific run rather than a default.
Some Box Hill estates set colour and finish rules for anything visible from the street or a public reserve. Glass is rarely an issue. For aluminium we match the approved colour range, usually monument, matt black or woodland grey, so the barrier passes both the estate guidelines and AS 1926.1.
We install pool fencing across Box Hill, Rouse Hill, The Ponds, Kellyville, Beaumont Hills, Kellyville Ridge and Riverstone. Being active across the north-west growth corridor means we already know the estate guidelines and the certifiers working in the area.
Contact Sydney's trusted fencing contractors and landscape designers
77 Garfield St
Wentworthville NSW 2145
75 644 310 547

Professional since 2016
No-obligation assessments across Sydney
Established local business
Full compliance and protection
Premium suppliers and warranties
Reliable project delivery
Best value for money
Contact us today for your free consultation and quote
Transform your Sydney property with expert fencing contractors and landscape designers