

Anti-climb mesh, palisade and access controlled gates for Macquarie Fields homes, unit blocks and yards along the rail corridor.
Macquarie Fields runs along the rail line and the Georges River bushland, with the TAFE campus, a spread of unit blocks and older housing, and light industrial premises around Fields Road. Rail reserve boundaries, laneways and the shared parking behind unit blocks are where we get called most often, because all three give access away from the street.
We install 358 anti-climb mesh and rigid welded panels on those boundaries, palisade where a frontage needs presence, and chain wire around larger yards and compounds. Unit blocks and commercial sites usually need gates with controlled access, so we run the conduit and fit anti-jemmy hardware as part of the job.
All fencing is galvanised steel installed to AS 1725 on concreted footings, and we quote every Macquarie Fields job in writing after a free on-site measure. Call 0492 879 796 to set up a measure.
Anti-climb steel where a Macquarie Fields property adjoins the rail reserve, a long boundary with no passive surveillance.
Welded panels with a 76mm by 12.7mm aperture, the strongest standard option against climbing and bolt cutters.
Perimeter and car park fencing for the unit blocks through the suburb, controlling who can reach resident parking.
Vertical steel pales that give a frontage presence and strength while keeping the building visible from the road.
Chain wire and welded mesh for the light industrial premises around Fields Road, including truck and pedestrian gates.
Sliding and swing gates with anti-jemmy hardware and conduit run ready for intercoms, keypads or fobs.
A rail reserve boundary is long, unlit and unwatched, so it needs a fence that cannot be climbed or cut quietly. We use 358 anti-climb mesh or heavy welded panels at 2.1m or higher, with the mesh taken close to ground level. Where the fence sits on rail-adjacent land we confirm the boundary position carefully before setting posts.
Yes. Car parks behind unit blocks are a common target because access is easy and nobody challenges a stranger. We fence the perimeter with welded mesh or 358 panels, fit a controlled vehicle gate and a separate pedestrian gate, and leave cabling ready for intercom or fob access so residents get in and nobody else does.
Security fencing on a common boundary is still a dividing fence, so the cost sharing and notice provisions of the NSW dividing fences legislation can apply. Most Macquarie Fields owners either agree with the neighbour first, or build the security fence just inside their own boundary so it is entirely theirs. We can quote either way.
For vehicles it is a cantilever sliding gate, because there are no ground tracks to jam and nothing to lever against. It should have a reinforced frame, a shrouded lock box, mesh matching the fence and a proper end stop. Pedestrian gates need a self-closing hinge, drop bolt and a latch guard so nothing can reach through and release it.
Yes. We install security fencing across Macquarie Fields, Glenfield, Ingleburn, Minto, Airds and Campbelltown, covering homes, unit blocks, schools and industrial premises. We are a licensed and insured NSW contractor working right across the metropolitan area.
Contact Sydney's trusted fencing contractors and landscape designers
77 Garfield St
Wentworthville NSW 2145
75 644 310 547

Professional since 2016
No-obligation assessments across Sydney
Established local business
Full compliance and protection
Premium suppliers and warranties
Reliable project delivery
Best value for money
Contact us today for your free consultation and quote
Transform your Sydney property with expert fencing contractors and landscape designers