Australian Made 358 Mesh Fencing
Panels welded in Australia from Australian steel, galvanised to AS/NZS 4680, and supplied with the mill certificates and local-content declarations tenders ask for.
Australian Made 358 Mesh Built for Sydney Sites
Where a specification says Australian made, it usually means two things: the steel is traceable and the finish is certified. Our 358 panels are welded here from Australian-sourced wire, and every batch comes with mill certificates covering wire diameter and tensile grade, plus a galvanising certificate to AS/NZS 4680. That paperwork is what lets a project engineer sign the panel off, and what satisfies local-content weightings in NSW government and council tenders.
Local manufacture also removes the substitution risk that comes with imported stock, where wire diameter and coating thickness can drift from the datasheet. Because panels are made here, we match heights, post centres and gate openings to your drawings instead of forcing a standard import to fit, and lead times are measured in weeks rather than shipping cycles. For the contractor side of the work, see our security fencing Sydney hub. If you need the wider security range, see our high security fencing solutions.
From single anti-climb gates for a Parramatta warehouse to multi-kilometre critical infrastructure perimeters, our Australian made 358 mesh is licensed, insured and installed by an experienced Sydney crew.
Local Manufacturing
Panels welded and galvanised in Australia for tighter tolerances and faster Sydney delivery.
- AS/NZS 4680 galvanising
- Custom heights 2.1m-3.0m
Anti-Climb Security
The 358 aperture defeats climbing and cutting, ideal for prison-grade and infrastructure perimeters.
- No finger or toe holds
- Razor-topping options
Compliance Ready
Full documentation for tenders, CPTED and asset-owner sign-off across NSW.
- $20M public liability
- Licensed & insured
Australian Made 358 Mesh FAQs
What makes 358 mesh Australian made and why does it matter?
Australian made 358 mesh is welded and hot-dip galvanised locally to AS/NZS standards rather than being imported as loose panels. Local manufacturing means the 76.2mm x 12.7mm x 4mm aperture is held to tighter tolerances, the galvanising suits our coastal and industrial conditions, and lead times for Sydney projects are far shorter. It also lets us match panel heights and post spacings to your exact site.
How much does Australian made 358 mesh fencing cost in Sydney?
As a guide, supplied and installed Australian made 358 mesh fencing typically runs from about a quoted rate per metre depending on panel height (2.1m to 3.0m), whether you add PVC or powder coating over the galvanising, and gate or razor-topping requirements. Bulk perimeter runs for warehouses and substations attract better per-metre rates. We provide a fixed written quote after a site measure.
How long does it take to manufacture and install 358 mesh panels?
Because our 358 mesh is Australian made, standard galvanised panels are usually ready within 1 to 2 weeks, with custom heights or powder-coated finishes taking 2 to 3 weeks. Installation of a typical residential or small commercial perimeter takes 1 to 3 days once posts are concreted and cured. Larger anti-climb security perimeters are staged over a week or more.
Is Australian made 358 mesh compliant for high-security and prison-grade sites?
Yes. The tight 358 aperture is too small for fingers or toe-holds, making it a genuine anti-climb and anti-cut barrier used on correctional, substation, airport and critical infrastructure sites. Our Australian made 358 mesh is galvanised to AS/NZS 4680 and can be certified for CPTED and perimeter security specifications. We supply compliance documentation for tenders and council or asset-owner sign-off.
Do you supply and install Australian made 358 mesh across Sydney?
We manufacture, supply and install Australian made 358 mesh right across Greater Sydney, including Western Sydney, the Hills District, Parramatta, the Sutherland Shire and industrial estates in Wetherill Park, Smithfield and Silverwater. We handle everything from single security gates to multi-kilometre facility perimeters. Call 0492 879 796 for a site assessment.
Related Services
358 Mesh Sydney
Core 358 mesh range
358 Mesh Security Fencing NSW
Security fencing detail
High Security Fencing
Full security range
Anti-Climb Fencing
Non-climbable barriers
Anti Climb Mesh Fencing
Welded mesh options
Security Fencing Parramatta
Western Sydney security
Commercial Security Fencing
Commercial perimeters
Fencing Services Sydney
All fencing solutions
Sourcing Australian-made 358 panels is one part of the job; specifying the right perimeter is the other. Our 358 mesh Sydney page sets out how we scope height, topping and footing detail for each site type.
Get YourFree Quote Today
Contact Sydney's trusted fencing contractors and landscape designers
Contact Information
Address
77 Garfield St
Wentworthville NSW 2145
ABN
75 644 310 547
Serving All Sydney
Professional since 2016
Why Choose Us?
Free Quotes
No-obligation assessments across Sydney
9+ Years Experience
Established local business
Licensed & Insured
Full compliance and protection
Quality Materials
Premium suppliers and warranties
On-Time Completion
Reliable project delivery
Competitive Pricing
Best value for money
Ready to Get Started?
Contact us today for your free consultation and quote
Professional Fencing & Landscaping Services Sydney
Transform your Sydney property with expert fencing contractors and landscape designers