Industrial Fencing Campbelltown
AS 1725 industrial fencing for Campbelltown factories, warehouses and transport yards, from the Blaxland Road precinct through to Minto and Smeaton Grange.
Industrial Fencing in Campbelltown
Industrial fencing around Campbelltown covers everything from older brick factories in the Blaxland Road and Rose Street precinct to newer distribution sheds pushing out towards Smeaton Grange and Gregory Hills. Add the southern rail freight line and constant truck movement along Narellan Road and Appin Road, and a perimeter here needs to handle vibration, vehicle strike and long unsupervised frontages.
The specification changes with what sits behind the fence. A Campbelltown recycling or storage yard is usually best served by heavy-gauge chain wire with tensioned straining wire and a barbed or razor topping. Sites holding tools, batteries or vehicles are better protected by 358 mesh, which resists cutting and gives nothing to climb. Palisade suits an office frontage, and welded mesh cages keep compressors, gas bottles and switchgear separated inside the yard.
We plan installation around your operation rather than the other way around. Boundaries are replaced in sections so the site is never fully open, temporary fencing closes any gap overnight, and night or weekend work is available where Campbelltown Council noise conditions allow. Every installer completes your induction, works to your SWMS and stays clear of live traffic routes, and we confirm the boundary against survey before digging. Call 0492 879 796 to book a free site measure.
What We Install Across Campbelltown
- AS 1725 compliant factory perimeters
- Heavy-gauge chain wire with barbed topping
- 358 anti-climb mesh for high-risk boundaries
- Palisade fencing for office frontages
- Cantilever sliding gates for truck entries
- Automated swing and tracked gates
- Bollards and crash-rated barriers
- Welded mesh gas bottle and switchgear cages
Industrial Fencing Options in Campbelltown
Factory Perimeters
Full boundary replacement for older Campbelltown factories where posts and footings have failed.
Anti-Climb 358 Mesh
Cut and climb resistant panels for Campbelltown yards storing vehicles, tools or batteries.
Palisade Frontage
Galvanised steel palisade defining the office and visitor side of a Campbelltown industrial site.
Truck Access Gates
Cantilever and tracked sliding gates sized for the rigid and semi traffic on Narellan Road.
Yard Protection
Bollards, guard rail and separation fencing keeping pedestrians away from forklift routes.
Staged Replacement
Section by section programming so a Campbelltown site never sits open or unsecured overnight.
Industrial Fencing Service Area Around Campbelltown
Industrial Fencing Campbelltown FAQs
Do you install industrial fencing that complies with AS 1725 in Campbelltown?
Yes. AS 1725 governs chain link fabric security fences and gates and covers post size, footing depth, mesh gauge, tensioning, barbed arms and gate construction. Campbelltown industrial tenants and landlords regularly need that reference for insurance or lease compliance, so we state the standard and the built specification on the quote and the final invoice.
What is the difference between 358 mesh and standard chain wire?
Standard chain wire has a diamond aperture wide enough to take a boot toe or bolt cutter. 358 mesh is welded from heavy wire on a very narrow grid, so there is no foothold and hand tools cannot easily reach the wires. For a Campbelltown site with a break-in history, running 358 across the vulnerable elevations usually pays for itself quickly.
Can you fence a Campbelltown site that stays open during the works?
That is the normal situation. We break the boundary into stages, complete one run at a time and close any open section with temporary fencing before leaving for the day. Where forklifts and trucks share the work zone we agree exclusion areas with your supervisor, and if daytime work is not workable we install after hours or over a weekend.
Do you handle bollards and vehicle barriers as well as fencing?
Yes. Most Campbelltown industrial jobs include some impact protection: concrete-filled bollards at roller doors, guard rail along racking, wheel stops in parking bays and crash-rated barriers protecting gas bottles, tanks or switchrooms. Installing them with the fence means one set of footings, one traffic management plan and one mobilisation.
How is the price for industrial fencing in Campbelltown worked out?
It is quoted after a free site measure, never from a rate card. We walk the boundary, check ground conditions and fall, measure gate openings, note access constraints and out-of-hours requirements, then issue a fixed written quote broken down by fence type, gates, hardware and any impact protection so you can see exactly what is included.
Get YourFree Quote Today
Contact Sydney's trusted fencing contractors and landscape designers
Contact Information
Address
77 Garfield St
Wentworthville NSW 2145
ABN
75 644 310 547
Serving All Sydney
Professional since 2016
Why Choose Us?
Free Quotes
No-obligation assessments across Sydney
9+ Years Experience
Established local business
Licensed & Insured
Full compliance and protection
Quality Materials
Premium suppliers and warranties
On-Time Completion
Reliable project delivery
Competitive Pricing
Best value for money
Ready to Get Started?
Contact us today for your free consultation and quote
Professional Fencing & Landscaping Services Sydney
Transform your Sydney property with expert fencing contractors and landscape designers