Industrial Fencing Sydney & NSW
Chain Wire, 358 Anti-Climb Mesh, Palisade & Industrial Gates
Perimeter fencing for warehouses, depots, factories and infrastructure. Free site measure across Greater Sydney.
Industrial Fencing Contractors for Sydney & NSW
Fencing and Landscaping Experts install industrial fencing across Greater Sydney and NSW — chain wire perimeters, 358 anti-climb welded mesh, steel palisade, barbed wire toppings and industrial gates. We fence warehouses, logistics yards, factories, council facilities, utilities sites and construction compounds, from a single gate replacement through to multi-hundred-metre staged perimeters.
Industrial fencing is a different discipline from residential work. Posts are heavier gauge and set in engineered footings, fence heights run from 1.8m to 2.4m and beyond with toppings, and the fence line has to work around truck movements, underground services and site operations that cannot stop for the installation. Our crews are inducted, carry white cards and work to your site's WHS management plan, SWMS and permit systems.
We service the industrial precincts of Western Sydney — Wetherill Park, Smithfield, Erskine Park, Eastern Creek, Ingleburn, Minto and surrounds — plus the Sutherland Shire and Greater Sydney generally, and we travel for larger regional NSW projects. Every job starts with a free site measure and a fixed written quote. See also our security fencing Sydney and chain wire mesh fencing pages for system-specific detail.
Industrial Fencing Systems We Install
The right industrial fence depends on the threat level, the boundary length and how the site operates. These are the systems we install across Sydney and NSW.
Chain Wire Industrial Fencing
Galvanised or PVC-coated chain wire (cyclone) fencing — the workhorse of Sydney industrial perimeters. Cost-effective over long boundaries, full visibility for CCTV and patrols, and available to 2.4m with barbed wire topping.
Best for: Long boundaries, depots, sporting and council facilities
358 Anti-Climb Welded Mesh
High-security welded mesh with apertures too small for handholds or bolt cutters. The specification of choice for sites with real intrusion pressure — substations, data centres, rail corridors and high-value stock.
Best for: High-security perimeters, critical infrastructure
Steel Palisade & Security Panels
Pressed steel palisade and welded security panels provide a strong physical and visual deterrent with a clean corporate appearance for street-facing industrial frontages.
Best for: Street frontages, business parks, visual deterrence
Barbed Wire & Razor Toppings
Three-strand barbed wire cranked toppings and razor coil raise the effective barrier height of any industrial fence. Installed to comply with NSW rules on topping heights above public land.
Best for: Raising barrier height on existing or new fencing
Industrial Gates & Access Control
Industrial sliding gates, double swing gates, boom gates and personnel gates — manual or motorised, with keypads, swipe readers and intercom integration, wired by a licensed electrician.
Best for: Vehicle entries, staff access, after-hours security
Temporary & Construction Fencing
Secure temporary fencing for construction sites, subdivisions and staged industrial works, installed and removed on your programme.
Best for: Construction sites, staged projects, events
Matching the Fence to the Site
We spec industrial fencing around what the site actually does — not a one-size-fits-all panel.
Warehouses & Logistics Yards
Perimeter fencing that protects stock and vehicles without blocking CCTV sightlines, with sliding gates sized for truck movements.
Factories & Manufacturing
Heavy-duty boundary fencing with staged installation so production and deliveries continue uninterrupted during the works.
Utilities & Infrastructure
358 anti-climb mesh and palisade systems for substations, telecom facilities, pump stations and rail-adjacent sites.
Security Ratings and Standards
"Anti-climb" is a specification, not a slogan. A genuine anti-climb fence uses mesh apertures too small for a handhold or boot toe — the 358 pattern (76.2mm x 12.7mm openings in 4mm wire) is the recognised benchmark, and its tight apertures also resist bolt cutters and hand tools.
Chain wire fencing for industrial use is manufactured and installed with reference to Australian Standard AS 1725 (chain link fabric security fences and gates), and gate automation is installed with the safety devices the motor manufacturer specifies, wired by a licensed electrician.
- 358 anti-climb mesh for high-security perimeters
- Chain wire systems referenced to AS 1725
- Barbed wire toppings installed to NSW height rules
- Engineered footings sized to fence height and wind load
- Motorised gates commissioned with safety sensors
What Shapes an Industrial Fencing Quote
Every industrial fencing project is quoted after a free site measure — no fixed rate cards, no hidden extras. $20M public liability insurance held.
Industrial Fencing Across Sydney & NSW
Industrial Fencing Sydney — FAQs
What is the difference between industrial, commercial and security fencing?
Industrial fencing is built for heavy-duty perimeters around warehouses, factories and depots — taller fences, heavier posts and deeper footings. Commercial fencing covers shopfronts and light business premises. Security fencing describes the protective function and applies to both — 358 anti-climb mesh and palisade are security systems commonly specified on industrial sites.
Which fence height and topping suits a warehouse or depot?
Most Sydney warehouse and depot perimeters run 1.8m to 2.4m, often with a three-strand barbed wire topping taking the barrier to around 2.7m. Where climbing is a genuine risk, 358 anti-climb mesh at 2.4m or higher is the stronger specification. We confirm the right height and topping at the free site measure.
What makes 358 mesh anti-climb, and when is it worth it over chain wire?
The 358 pattern has 76.2mm x 12.7mm apertures in 4mm wire — too narrow for fingers, boot toes or bolt cutters. Chain wire remains the practical choice for long boundaries where visibility and value matter; 358 mesh earns its premium on perimeter sections facing genuine intrusion pressure.
Do you handle large industrial projects and WHS requirements?
Yes. Our installers carry white cards, complete site inductions and work to your WHS management plan, SWMS and permit systems. We stage long perimeters so the site stays secured throughout, and we hold $20M public liability insurance.
Can industrial fencing integrate gates and access control?
Yes — we install industrial sliding and swing gates, boom gates and personnel gates with keypads, swipe access or intercoms. Motorised gates are wired by a licensed electrician and commissioned with safety sensors.
Do you install industrial fencing in regional NSW?
Our core area is Greater Sydney, including the Western Sydney industrial precincts and the Sutherland Shire. For larger industrial and infrastructure projects we travel to regional NSW — send through the site location and scope for a project quote.
Where an industrial boundary needs a higher security rating, we specify anti-climb systems. Details are on our 358 mesh Sydney page.
Industrial Fencing Areas We Cover Across Sydney
Local industrial fencing teams working right across Sydney. Choose your suburb for area-specific detail, or call 0492 879 796 for a free measure.
Get YourFree Quote Today
Contact Sydney's trusted fencing contractors and landscape designers
Contact Information
Address
77 Garfield St
Wentworthville NSW 2145
ABN
75 644 310 547
Serving All Sydney
Professional since 2016
Why Choose Us?
Free Quotes
No-obligation assessments across Sydney
9+ Years Experience
Established local business
Licensed & Insured
Full compliance and protection
Quality Materials
Premium suppliers and warranties
On-Time Completion
Reliable project delivery
Competitive Pricing
Best value for money
Ready to Get Started?
Contact us today for your free consultation and quote
Professional Fencing & Landscaping Services Sydney
Transform your Sydney property with expert fencing contractors and landscape designers