Industrial Fencing Sutherland Shire
AS 1725 compliant industrial fencing for Sutherland Shire factories, transport yards and depots, from Taren Point through to Kurnell and the Heathcote Road corridor.
Industrial Fencing in Sutherland Shire
Industrial fencing in Sutherland Shire deals with conditions most suburban fences never see. The Taren Point industrial area, the light-industrial pockets behind Kirrawee and Caringbah, and the heavy industry out at Kurnell all sit close to Botany Bay, so salt-laden air attacks any perimeter that is not properly hot-dip galvanised. We build every Shire perimeter to AS 1725, the Australian Standard covering chain link fabric security fences and gates, and note that specification on your quote.
Choosing the right barrier matters more than choosing the tallest one. Heavy-gauge chain wire suits long boundary runs around Taren Point storage yards where visibility and airflow are useful. 358 anti-climb mesh, with its narrow apertures, is the right call where theft or trespass is a live problem. Steel palisade gives a hard visual line to a street frontage, while welded mesh panels are the neat option for a plant room, substation or bin enclosure inside a larger Sutherland Shire site.
Most Shire sites cannot shut down while a fence goes in, so we stage the work bay by bay, hold temporary hoarding across open sections overnight, and run after-hours or weekend installs where truck movements make daytime work impossible. Our crews carry white cards, complete your site induction before tools come out, and work to your traffic management plan. Before any post hole is dug we confirm the boundary against title and check asset protection zones and underground services. Call 0492 879 796 to book a free site measure.
What We Install Across Sutherland Shire
- AS 1725 compliant perimeter fencing
- Heavy-gauge galvanised chain wire runs
- 358 anti-climb mesh panels
- Steel palisade street frontages
- Cantilever sliding gates for B-double access
- Welded mesh plant and switchboard enclosures
- Safety bollards and impact protection
- Barbed and razor topping to AS 1725
Industrial Fencing Options in Sutherland Shire
Heavy-Gauge Chain Wire
Hot-dip galvanised chain wire perimeters specified for the salt air around Taren Point and Kurnell.
358 Anti-Climb Mesh
Narrow-aperture 358 panels for Shire sites with a repeat trespass or tool theft history.
Steel Palisade
Welded steel palisade with pointed or rounded tops where a hard deterrent to the street is wanted.
Cantilever Truck Gates
Ground-clearing cantilever gates that keep wide loads moving through Taren Point yards without a floor track.
Bollards and Barriers
Concrete-filled bollards and crash-rated barriers protecting docks, tanks and switchrooms.
Staged After-Hours Work
Night and weekend programming so Shire operations keep running while the perimeter is replaced.
Industrial Fencing Service Area Around Sutherland Shire
Industrial Fencing Sutherland Shire FAQs
Does industrial fencing in Sutherland Shire need to meet AS 1725?
AS 1725 is the Australian Standard for chain link fabric security fences and gates, and it is what most Sutherland Shire insurers, landlords and asset owners expect to see referenced. It sets out post sizes, footing depths, wire gauge, tensioning and gate hardware. We nominate the AS 1725 clause set on every industrial quote in the Shire so you can hand the documentation straight to your insurer or head contractor.
Should I choose chain wire, 358 mesh or palisade for a Taren Point yard?
It depends on what you are protecting. Heavy-gauge chain wire is the most economical way to secure a long Taren Point boundary where you mainly need containment and clear sightlines. 358 mesh has apertures too small for fingers or standard cutters, so it suits sites storing high-value stock or tooling. Palisade suits street frontages where you want an obvious deterrent. We often mix all three across one Shire site.
Can you install a gate wide enough for semi-trailers?
Yes. Cantilever sliding gates are the usual answer for Sutherland Shire depots because they carry on a counterbalanced beam with no floor track to jam with grit or stormwater. For narrower openings a tracked slider or a pair of heavy swing leaves works, and all can be fitted with motors, safety edges, loop detectors and intercoms tied to your access control.
Will the installation shut down our operation?
It should not. We program Sutherland Shire industrial fencing in stages so only one section of boundary is open at a time, and we secure open runs with temporary fencing overnight. Where forklift and truck traffic makes daytime work unsafe we install after hours or across a weekend. The staging plan is agreed before we start so your dispatch schedule is never a surprise.
How is industrial fencing in Sutherland Shire quoted?
Every Shire site is different, so we do not publish rates. Height, mesh type, footing depth in reactive or sandy ground, gate size, motorisation and how much after-hours work is needed all change the scope. We attend site, measure the boundary, confirm levels and access, then issue a fixed written quote with the specification set out line by line.
Get YourFree Quote Today
Contact Sydney's trusted fencing contractors and landscape designers
Contact Information
Address
77 Garfield St
Wentworthville NSW 2145
ABN
75 644 310 547
Serving All Sydney
Professional since 2016
Why Choose Us?
Free Quotes
No-obligation assessments across Sydney
9+ Years Experience
Established local business
Licensed & Insured
Full compliance and protection
Quality Materials
Premium suppliers and warranties
On-Time Completion
Reliable project delivery
Competitive Pricing
Best value for money
Ready to Get Started?
Contact us today for your free consultation and quote
Professional Fencing & Landscaping Services Sydney
Transform your Sydney property with expert fencing contractors and landscape designers